KRC new products, Lead Ballast Brick & featured items

Aluminum Helmet Tear Off Pins w/ Bell Helmet Hex.  Sold in a pair.

Slightly different from the KRC-1014, these can be turned with a coin or anything you have available to fit in the slot.  Sold in a pair or a package of 10 (KRC-1016).

Safety White Coated Lead Ballast Bricks will allow you to place weight anywhere on your chassis using our steel brackets with (2) predrilled 1/2" holes, 5" apart.  Sold seperately.

 Aluminum washers are perfect for the quick, easy mounting of body panels.  Set of 20. 

  Aluminum Cam Buttons will keep your cam from walking back and forth in your block, which can cause inaccurate timing and premature timing chain wear. 

 KRC Racing NPT to smooth hose adapters will let you connect your radiator hose to the KRC Racing water temperature regulator. They are manufactured from high quality aluminum and then red anodized for protection.   Fitting, Straight, 

1-3/8 in. Male to 1-3/4 in. Hose Barb. 

 Fitting, Straight, 1 3/8 in. Male to -16 AN, Aluminum, Black Anodized. 

 Fitting, Straight, 1 3/8 in. Male to -20 AN, Aluminum, Black Anodized.

Lightning Gear Filler will fill a rear end with 4-5 quarts, 90W Oil Fast.  Lightweight 7lb. tank can be filled with 60 PSI air pressure and controlled by manual valve.  A 100 PSI liquid fill gauge and dipstick in the cap will help you pre-meausre oil to speed up the rear end changing process.

Kit includes:  Plastic Male #8 Plug, #8 Cap, Female, Blue Anodized, 5/8" I.D. Hose to 1/8" Female, 3/4" Male to 1/8" Male.

Quickly and easily open filter canister to inspect for engine contaminants.  Inspection guide included to analyze your racing engine condition.

Available colors:  Black & Red

Oil filters are required to be cut open and inspected annually on all piston engines by the Federal Aviation Association.  Replacement Aviation Adapter Kit for Oil Filter Inspection Tool (KRC-1203).

Quickly and easily open filter canister to inspect for engine contaminants.  Inspection guide included to analyze your racing engine condition.

Available colors:  Black & Red

Replacement hardened steel cutter wheel for KRC-1201 & KRC-1203.

For use with KRC-1203.  This is an adapter for large racing Wix filters. 

Complete automotive replacement hardware kit for KRC-1201.

.912 Mandrel to be used with our KRC-1355, Piston Vice.  Keyed for accurate placement every time.

 .927 Mandrel to be used with our KRC-1355, Piston Vice.  Keyed for accurate placement every time. 

Hold pistons securely at any angle up to 30°.  One set up and remaining pistons are positioned precisely the same.  Per for re-matching/balancing piston sets and fly cutting for high lift cams.

 .975 Mandrel to be used with our KRC-1355, Piston Vice.  Keyed for accurate placement every time. 

  .984 Mandrel to be used with our KRC-1355, Piston Vice.  Keyed for accurate placement every time. 

  .989 Mandrel to be used with our KRC-1355, Piston Vice.  Keyed for accurate placement every time. 

Steel bracket attaches to our KRC-1021, 24# Lead Ballast Brick using 3" x 1/2" hex bolts.  Sold separately.

 Steel bracket attaches to our KRC-1021, 24# Lead Ballast Brick using 3" x 1/2" hex bolts.  Sold separately. 

Remove Studs without damage.  Long enough to protect skilled operators hand while removing stud at track or shop.

Easily remove rust or glue from wheels.  Fits any wheel when mounted and attached to  your brush.

Measure tire before mounting on rim.  KRC Patent #6681621.

Safely inflate 1-4 racing tires up to approximately 40PSI automatically using compressed air.  Hoses may be purchased separately, (KRC-8512).

Mini Balanced Safety Air Inflation System for one tire at a time.  Additional adapter can also be attached to this to safely inflate 1-4 tires at a time (KRC-8513).

8' hose with quick connect to male quick coupler.

Attaches to KRC-8511 and can only be used safely with the Mini Balanced Safety Air Inflation System.

Easily make chassis adjustments without unloading springs and tearing up your coil over kit.  Designed for use with KRC Coil Over Kits.  The wrench also has 3/4" hex rim handle to loosen your shock.

Robust 6061 Aluminum, tig welded, airplane oil catch tray.  A must have for your single engine plane.  This lightweight, seven pound tech tray can also hold up to 33 quarts of oil.  Catch the leaks and be able to change your oil with very little mess and effort.  Dump the drippings out and hose out.  Keep your hangar looking great and your floor oil free!  Engineered and manufactured for you in the USA.

Easily make chassis adjustments without unloading springs and tearing up  your coil over kit.  Designed for use with KRC Coil Over Kits.  This wrench also has 3/4" hex rim handle to loosen shock..

3-1/2" Coil Over Spanner Wrench with 3/4" Hex for Shock Bolt.  Works with KRC-8817 & KRC-8818.

2" Shock Body Wrench (Fits on AFCO and any 2" Body Shock).  The 2" Shock Body Wrench is primarily used to hold the body of an AFCO Shock while rebuilding the shock.